Water-resistant white PVAc wood glue for indoor and outdoor use, if not exposed to climatic influences. Conforms to NEN-EN 204 D3 standard. 

 

• Water resistant (NEN-EN 204 D3)

• Dries transparently. 

• Solvent free

 

 

Moisture resistance : Really good (water-resistant, conform NEN-EN
                                  204 D3). 

Dilatability : Don’t dilute with water, unless it is aimed at
                                  reaching the original viscosity

Frost resistance : It is good. In case of slightly frozen glue, slowly
                                  defrost in a well heated room (never close to a
                                  source of heat).

                                  Stir thoroughly. The glue can be used again once
                                  it reaches its normal thickness.
                                 
                                  It is recommended to perform a small glue test
                                  at first. Confirms to NEN-EN 204 D3.

 

 

Glue type                 : aqueous dispersion

Basic material         : polyvinyl acetate dispersion

Colour         : white, dries transparent.

Solid content         : approx 52%

Density         : 1090 kg/m³ 

Viscosity         : 12000 (+ or – 2000) mPa.s, at +20ºC

Flash point         : K3 >55ºC. Wet glue is not flammable.

White point         : approx +5ºC

PH                 : 3.

Temperature resistance : from -20ºC to +60ºC